Tinhy Geosynthetics Product description
Tinhy Geosynthetics HDPE textured geomembranes are available with either single- or double-sided textured surface which exhibit superior shear strength and the highest multi-axial performance offered in the market. Our products have a proven history of success in many lining applications, including:soild wasted landfill,Ming,Coal Ash Pond, Animal Waste Containtment.
It is a co-extruded textured high-density polyethylene (HDPE) geomembrane available on one or both sides. It is manufactured from the highest quality resin specifically formulated for flexible geomembranes. This product is used in applications that require increased frictional resistance, excellent chemical resistance and endurance properties.
The main component of HDPE is the monomer ethylene, which is polymerized to form polyethylene. The main catalysts are aluminum trialkylitatanium tetrachloride and chromium oxide
The polymerization of ethylene and co‐monomers into HDPE occurs in a reactor in the presence of hydrogen at a temperature of up to 110° C (230° F). The resulting HDPE powder is then fed into a pelletizer.
Geomembranes such as HDPE 1.5 mm will be specified for their high chemical resistance, strong mechanical properties, and long-term service lives; but we should also take time to recognize that this material offers a carbon footprint rating that is 3x lower than compacted clay. Even if you evaluate good quality clay and a borrow site just 16 km from the project site, HDPE geomembranes coming from 1000 km away still outperform compacted clay on a measure of carbon footprint.
Best Quality 1.5mm Smooth/Textured HDPE Geomembrane Manufacturer Information
| Product |
High quality Textured HDPE liner film, HDPE geomembrane |
| Standard |
GM13-textured |
Certifitcation |
CE/ISO/BTTG/TRI |
| Thickness |
1.0mm-3.0mm |
Technology |
Calendering |
| Width |
2m-8m |
Material |
HDPE/LDPE/LLDPE |
| Length |
50m |
Original |
China |
Best Quality 1.5mm Smooth/Textured HDPE Geomembrane Manufacturer data
| Textured HDPE geomembrane-GM13(ASTM) technical data |
| Properties |
Test Method |
Test Value |
| 1.0 mm |
1.25 mm |
1.5 mm |
2.0 mm |
2.5 mm |
3.0 mm |
| Dimple height(mm) |
D7466 |
0.25 |
0.25 |
0.25 |
0.25 |
0.25 |
0.25 |
| Density (min.) |
D 1505/D 792 |
0.94 |
0.94 |
0.94 |
0.94 |
0.94 |
0.94 |
| yield strength |
D 6693 |
15 kN/m |
18 kN/m |
22 kN/m |
29 kN/m |
37 kN/m |
44 kN/m |
| break strength |
10 kN/m |
13 kN/m |
16 kN/m |
21 kN/m |
26 kN/m |
32 kN/m |
| yield elongation |
12% |
| break elongation |
100% |
| Tear Resistance (min. ave.) |
D 1004 |
125 N |
156 N |
187 N |
249 N |
311 N |
374 N |
| Puncture Resistance (min. ave.) |
D 4833 |
267 N |
333 N |
400 N |
534 N |
667 N |
800 N |
| Stress Crack Resistance (2) |
D 5397 |
300 hr. |
| Carbon Black Content - % |
D 4218 |
2.0-3.0% |
| Oxidative Induction Time (OIT) (min. ave.) |
|
|
|
|
|
|
|
| (a) Standard OIT |
D 3895 |
100 min. |
| (b) High Pressure OIT |
D 5885 |
400 min. |
| Oven Aging at 85°C |
|
|
|
|
|
|
|
| (a) Standard OIT (min. ave.) - % retained after 90 days |
D 3895 |
55% |
| (b) High Pressure OIT (min. ave.) - % retained after 90 days |
D 5885 |
80% |
| UV Resistance |
|
|
|
|
|
|
|
| High Pressure OIT (min. ave.) - % retained after 1600 hrs |
D 5885 |
50% |
Packing & Shipping
For geomembrane, in order to avoiding water when shipping on the boat, we specially use a thin layer plast firm to package the geomembane in the side, then white or black woven bags for outside, paper tube inside, easy to install.
Marking our label or as per client request, loading them into container safely at our factory, make all goods arriving clients no damage, keep perfect. They are packed in the woven bags 50m/roll,100m/roll or follow your demand
Shipping: load container directly from our plant by truck, then go to the port, than go your site by sea.
Applications
Best Quality 1.5mm Smooth/Textured HDPE Geomembrane Manufacturer
A, ageing resistance from the intense stresses of weather
B, higher friction angles
C, Highly resistant to hazardous chemicals HDPE has long been the lining of choice for this
application.
D, Used as either primary or secondary containment/caps with or without GCL.
E, High chemical and Hydrocarbon resistance.
F, Can withstand constant exposure to the sun.
Certifications
A, CE
B, ISO 9001 and ISO1400q
C, China Famours Brand and other certificates
Other Accessories products that you maybe interested in:
Such as 2.0mm welding machine 900, 1.0mm welding machine 800, Welding torch, Satefy Products, Safety helmet, Safety shoes, Falling protection, Eye protection, body protection
FAQ
1.Q: What's about your production capacity?
A: We produce 10 x 40ft container per day for geomembrane.
2.Q: How about your delivery time?
A: Within 7-14 days after deposit, we always deliver the goods according to customer's requirement.
3.Q: What's about the minimum order quantity?
A: The MOQ is 5000m2, customer can mix different sizes in one 20GP. We suggest at least 20GP,as by our exporting experience, 20GP container sea freight is more economic.
4.Q: How about quality guarantee of your tires?
A:1) Material Purchase Control. Our Material are imported from Iran and Saudi Arabia. Those country specializing in better raw material.
2) Advanced production equipment, producing ASTM specification data.
4)We could provide you TRI or BTTG test report if you need.
5.Q: Do you have stock?
A: All tires we send to customers are new tires. We don't have any stock to ensure customers use best new tires and new patterns.
6. Q: Terms of payment
A: 1). First time cooperation, we can accept 30% TT deposit, the balance should be paid against copy of B/L within 10 days.
2). By irrevocable LC at sight.
7.Q: What certificates do you have?
A: CE, ISO, SGS, TRI, BTTG, MSDS
Website: http://sdtianhai.en.made-in-china.com, http://sdtianhai.en.made-in-china.com
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}