Tinhy Geosynthetics HDPE liner Product description
A geomembrane is very low permeability synthetic membrane liner or barrier used with any geotechnical engineering related material so as to control fluid (or gas) migration in a human-made project, structure, or system. Geomembranes are made from relatively thin continuous polymeric sheets, but they can also be made from the impregnation of geotextiles with asphalt, elastomer or polymer sprays, or as multilayered bitumen geocomposites. Continuous polymer sheet geomembranes are, by far, the most common.
HDPE liner (High Density Polyethylene) is special form of polyethylene that has longer carbon strings with less branching. The result is a more compactable molecule and a higher density. HDPE liner is available smooth or with texturing called textured geomembrane to increase the slip coefficient. HDPE liner is shipped in large rolls and mechanically deployed. All seams are made in the field using heat fusion or a tape designed for geosynthetics. HDPE liner is slightly less expensive than other materials, but has a higher cost of installation. It can be cost effective in large projects. HDPE liner should only be installed by qualified professionals.
Shandong Tianhai is leading Manufacturer Supplier & Exporter of Pond Liner which made up of HDPE Liner., LDPE Liner, LLDPE Liner are used in Decorative Ponds for storing water & in Golf Course for creating Artificial Lakes, using for Rain Water Harvesting Ponds etc.. Pond liner is impermeable geomembrane used retention of water, which including the lining of lakes, garden ponds & Artificial Ponds. One can need to be protected Pond liners from sharp objects Like glass, stones & it can be punctured by any such objects in the water. Provided Protection with the layers of sand, fiber-matting, concrete & other materials. Shandong Tianhai manufactured Pond liners in rolls.
Geomembranes are used over concrete, compacted clay, and asphalt due to their efficacy. Geomembranes display a host of physical, chemical, and mechanical resistance properties that are useful to protect the environment and water resources. Geomembranes of superior quality are less susceptible to ground movement and are considered to be more economical and safer for a majority of applications.
Tinhy Geosynthetics HDPE liner specifications
| Product |
High quality HDPE liner film, HDPE geomembrane |
| Standard |
GM13-smooth |
Certifitcation |
CE/ISO/BTTG/TRI |
| Thickness |
0.2mm-3.0mm |
Technology |
Blowing |
| Width |
2m-8m |
Material |
HDPE/LDPE/LLDPE |
| Length |
50m-100m |
Original |
China |
Tinhy Geosynthetics HDPE liner technical datas
| Smooth HDPE geomembrane-GM13(ASTM) technical data |
| Properties |
Test Method |
Test Value |
| 0.75 mm |
1.00 mm |
1.25 mm |
1.50 mm |
2.00 mm |
2.50 mm |
| Thickness (min. ave.)· lowest individual of 10 values |
D5199 |
nom -10% |
nom -10% |
nom -10% |
nom -10% |
nom -10% |
nom -10% |
| Density (min.) |
D 1505/D 792 |
0.94 |
0.94 |
0.94 |
0.94 |
0.94 |
0.94 |
| yield strength |
D 6693 |
11 kN/m |
15 kN/m |
18 kN/m |
22 kN/m |
29 kN/m |
37 kN/m |
| break strength |
20 kN/m |
27 kN/m |
33 kN/m |
40 kN/m |
53 kN/m |
67 kN/m |
| yield elongation |
12% |
| break elongation |
700% |
| Tear Resistance (min. ave.) |
D 1004 |
93 N |
125 N |
156 N |
187 N |
249 N |
311 N |
| Puncture Resistance (min. ave.) |
D 4833 |
240 N |
320 N |
400 N |
480 N |
640 N |
800 N |
| Stress Crack Resistance (2) |
D 5397 |
300 hr. |
| Carbon Black Content - % |
D 4218 |
2.0-3.0% |
| Oxidative Induction Time (OIT) (min. ave.) |
|
|
|
|
|
|
|
| (a) Standard OIT |
D 3895 |
100 min. |
| (b) High Pressure OIT |
D 5885 |
400 min. |
| Oven Aging at 85°C |
|
|
|
|
|
|
|
| (a) Standard OIT (min. ave.) - % retained after 90 days |
D 3895 |
55% |
| (b) High Pressure OIT (min. ave.) - % retained after 90 days |
D 5885 |
80% |
| UV Resistance |
|
|
|
|
|
|
|
| High Pressure OIT (min. ave.) - % retained after 1600 hrs |
D 5885 |
50% |
Tinhy Geosynthetics HDPE liner Production Process
Tinhy Geosynthetics HDPE liner Product Features
§ Excellent physical and mechanical performance § Excellent drainage effect
§ High tearing resistance § High puncture resistance
§ High aging resistance § High UV resistance
§ Anti-acid&alkali § High chemical and Hydrocarbon resistance.
§ high and low temperature resistance § Long working life
§ Hydraulic pressure resistance § High tensile strength
§ High strength § Non-poisonous
Tinhy Geosynthetics HDPE liner Packing and Shipping Details
For HDPE liner shipment, in order to avoiding water when shipping on the boat, we specially use a thin layer plastic firm to package the geomembane in the side, then white or black woven bags for outside, paper tube inside, easy to load and download.
Paste our label or as per client request, loading them into container safely at our factory, make all goods arriving clients no damage, keep perfect. They are packed in the woven bags 50m/roll,100m/roll or follow your demand
Shipping: load container directly from our plant by truck, then go to the port, than go your site by sea.
Tinhy Geosynthetics HDPE liner Projects Applications
& Environmental Projects
Hazardous Waste Disposal Site*Domestic Waste Landfill*Flying Fly ash landfill *Mining Tailings storage*Power Plant Ash Dam*Oil Tank*Evaporation Pond *Artificial Wetland*Intensive Livestock*Avian Breeding* Intensive livestock and poultry farming* heap leach pads
& Building construction Projects
Plant roofing * underground garage roofing *underground building side wall * floor*Golf course
& Aquaculture and Agriculture Projects
Reservoir *canal * river *watershed management *fish and shrimp pond * lotus pond*swimming pool
& Traffic Projects
High-speed rail *subway * railway * highway*Tunnel
Application Features
1, Separation: the prevention from intermixing of adjacent dissimilar soils and or materials
2, Filtration: the retaining of soil or other particles subject to hydrodynamic forces while allowing the passage of fluids into or through the geosynthetic.
3, Drainage: the collecting and transmitting of precipitation, ground water and or other liquids or gases along the plane of the geosynthetic.
4, Reinforcement: the use of the properties of a geosynthetic to improve the mechanical properties of soil or other construction materials.
5, Barrier: the prevention or reduction of the movement of any fluid through a construction by the use of a geosynthetic barrier.
6, Protection: the use of a geosynthetic material as a localised stress reduction or dissipation layer to prevent or reduce damage to a given surface, material or layer.
7, Surface erosion control: the use of a geosynthetic to prevent soil or other particle movements on the surface of a slope.
8, Stabilization: improvement of the mechanical behaviour of an unbound granular material by including one or more geosynthetic layers such that deformation under applied loads is reduced by minimizing movement of the unbound granular material.
9, Convenience:Reflective factor, good welding performance and convenient construction
Tinhy Geosynthetics Company Description
Tinhy Geosynthetics was established in the year 2002, and over the last 18 years, it has acquired an unmatched expertise and distinguished reputation in the industry. Today, we are a globally recognized manufacturer, installer, exporter and supplier of an extensive range of products most widely used in the irrigation sector, water & waste management, farming pond, mining, environmental, civil & agricultural fields. As an ISO 9001:2000 certified company, and a brand name synonymous to premium quality and innovative technologies, our company is renowned as a reliable exporter worldwide in countries like Congo, South Africa, Philippines, and many Southeast Asia countries.
We provide the extensive product portfolio comprising world class HDPE Film/Sheet/Liner/Geomembrane, LDPE Film/Sheet/Liner/Geomembrane, HDPE Pipes & Fittings, Cap Covers/Cover Tops/Tarpaulins, UV Stabilized Films, Mulching Films.
Over the years, our company has won the titles of "China Famous Brand", "Shandong Brand" and "Shandong Famous Brand", and obtained CRCC certification special for railway product , COC environmental certification, EU CE certification, ISO international certification, AAA credit rating certificate, etc. And has the right to import and export.
Tinhy Geosynthetics advantage and Quality Control and innovation
A, Established Geosynthetics Application Technology R & D Center
B, Established an industry-university research base with several Universities
C, Equipped with the nation's leading professional inspection and testing equipment
D, Tinhy New Materials has always been a professional, innovative and leading benchmark in the construction of Geosynthetics.
E, More than 14 testing equipments
F, Passed ISO, GM13 test, China Environmental, CRCC Railway Certification, CE Certification, and received an on-site supervision and audit of third-party organizations on average every month.
G, Big production capacity, fast delivery
H, Provide experience welder to help you in construction if need.
I, Provide a complete set of anti-seepage engineering solutions
K, The member of Chinese Technical Association on Geosynthetics
L, Offer competitive price
M, Possess international welder certificate and 56 patents
Tinhy Geosynthetics some certificates
Tinhy Geosynthetics Activities
Meeting and Training
Exhibitions
Customers visit plant
Travalling
Tinhy Geosynthetics also provides the following parts
FAQ
1, Q: Are you the factory or trading company? Located?
A: 100% plant, not trading company, we are in Jinan city of Shandong Province in China.
2. Q: What's about your production capacity?
A: We produce 5 x 40ft container per day for HDPE geomembrane.
3. Q: How about your delivery time?
A: Within 7-14 days after deposit, we always deliver the goods according to customer's requirement.
4. Q: What's about the minimum order quantity?
A: The MOQ is 5000m2, customer can mix different sizes in one 20GP. We suggest at least 20GP,as by our exporting experience, 20GP container sea freight is more economic.
5. Q: How about quality guarantee of your liner?
A:1) Material Purchase Control. Our Material are imported from Iran and Saudi Arabia or Qatar. Those country specializing in better raw material.
2) Advanced production equipment, producing ASTM specification data.
3). This HDPE liner life can last up to 100 years when covered under the ground.
6. Q: Do you have stock?
A: All liners we send to customers are new liners. We don't have any stock to ensure customers use best new liners .
7. Q: Terms of payment
A: T/T and L/C
8. Q: Do you accept the OEM?
A: Yes
9. Q: Samples available and can I visit your factory?
A: Yes
Website: http://sdtianhai.en.made-in-china.com, https://sdtianhai.en.made-in-china.com/
https://sdtianhai.en.made-in-china.com(tinhy-hdpe-liner)-ba0b3771
Welcome your contact soon !
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}